Power over Ethernet Adapter Kit
33 ₼
| Kit | |
|---|---|
| Contents | POE200A injector + POE200B splitter |
| POE200A (injector) | |
|---|---|
| Ports | 1× 10/100 Mbps LAN (Auto MDI/MDIX), 1× 10/100 Mbps PSE |
| Power | 48 V DC input |
| Use | |
|---|---|
| Distance | Up to 100 m of Ethernet cable |
| Application | Cameras, access points and other non-PoE devices |
TP-Link T1500-28PCT JetStream 24-Port 10/100Mbps + 4-Port Gigabit Smart PoE+ Switch
524 ₼
TP-Link EAP320 AC1200 Wireless Dual Band Gigabit Ceiling Mount Access Point
176 ₼
TP-Link TL-POE200 Power over Ethernet Adapter Kit is a device for carrying power over a network cable (PoE). When a camera, access point or IP phone has to go far from a socket — on a ceiling, a pole or out in the yard — you no longer need to run a separate power line.
What to check: the PoE standard (802.3af / at / bt) and the power draw of the device you are connecting must match what this unit can deliver. Over long runs cable quality affects the result as well.
| Powers a non-PoE device over PoE | the simplest way to install a camera or access point where there is no socket. |
|---|---|
| Two units in the kit | the POE200A injector puts power onto the cable, the POE200B splitter takes it back off at the far end. |
| POE200A | 1× 10/100 Mbps LAN port, 1× 10/100 Mbps PSE port, 48 V DC input. |
| No need to replace your switch | it works with an ordinary non-PoE switch. |
| Up to 100 m | one Ethernet cable carries both data and power. |
| In stock in Baku, with warranty. | |
The current price on the site is 33 ₼. It includes the official TP-Link warranty, delivery in Baku and shipping to the regions on request.
If you also need installation, our Office network setup service starts from 200 ₼; the site visit and quote in Baku are free and we give a 6-month warranty.
For a comparison with the closest models, a price table and buying advice, see the guide for this category.
The standard figure is up to 100 metres. Some TP-Link models have an extended-distance mode that goes further at the cost of speed — usually not a problem for a camera.
If the camera supports PoE, yes. A device without PoE support needs a splitter, which separates the power from the cable and feeds it into the device power socket.
For 2–3 cameras an injector is enough. From four cameras up, a switch with PoE ports is both cheaper and tidier — every cable ends up in one device.
The device is sold by the official TP-Link partner in Azerbaijan with official warranty. Delivery in Baku is available and shipping to the regions is possible. If you need installation, see our services page.
Reviews
There are no reviews yet.